acw47.memo
14 December 1997
BPC 10: ROUGH DRAFT
METER RESPONSES AND BY-PASSED CHARGE
There is possibly more false data, false significance, stupidity and confusion connected to the role and use of a meter. Especially in dealing with By-Passed Charge.Where there are heavy areas of BY-PASSED CHARGE, there are heavy UPSETS.Meters do not read well in areas of heavy UPSETS.Sometimes the client can be so overcharged that the meter will give a reverse response.When a processor is observing a meter in action they are observing the flows of energy along certain lines or pathways.The current flowing from one electrode to the other is setting up an ARTIFICIAL FLOW OF ENERGY THAT CAUSES A MINUSCULE WALL OF CROSS ENERGY ACROSS THE CLIENT TO PROCESSOR - OR FROM CLIENT TO THE KNOWINGLY FOCUSED OR STUCK POINT OF ATTENTION.The ENERGY FLOW looks something like this:OOOOOOOOOOOOOOOOOOOOO~~~~~Processor Presence~~~~~~OOOOOOOOOOOOOOOOOOOOOO~~~Processor to Client flow line~~OO>>>>>>>>intentions<<<<<<<<<OO.......v...........v.......^...........^.........OO.......v...........v.......^...........^.........OO..../....\ ......../.........\............\.........O[]>>>+>>>>meter flow >>>->>>>[]electrodesO.../......\......./............\............\.......OO..v.......v.....v............^...........^......OO.case..ptp..w/h.....upset...spouse...OO>>>charge>>>charge<<charge<<OO>>>mass>><<mass>><<mass<< OO>>>force>><<force>><<force<<OO>>>charge>>>charge>>charge<<OO Client to charged areas flow lines OO>>>>>>>>intentions<<<<<<<<<OOOOOOOOOOOOOOOOOOOOO~~~~~~Clients Presence~~~~~~OOOOOOOOOOOOOOOOOOOOThe flow of energy between the client and processor is going through an artificial barrier created by the current or energy flowing through the electrodes.What the needle is showing is the points of change or no change of these cross conflicting flows.All a change of needle manifestation means is something changed on that METER FLOW LINE.In the presence of an effective eductive comm. and F/N, and Green Zone Truth Phenomena:OOOOOOOOOOOOOOOOOOOOO~~~~~~Processor Presence~~~~~OOOOOOOOOOOOOOOOOOOOOO~~Processor to Client flow line ~~OO>>>>>>>>intentions<<<<<<<<<OO.......v...........v.......^...........^.........OO.......v...........v.......^...........^.........OO..../....\ ........./.........\............\.........O[]>>>+>>>>meter flow >>>-->>>>[]electrodesO.../......\......./............\............\........OO..v.......v.....v............^...........^.......OO..f/n....f/n...f/n..........f/n..........f/n......OO>no charge>no charge<no charge<OO>no mass>>no mass><no mass<< OO>>+ force>< + force >< + force<<OO>>>> free life force particles <<<<OO>>>>> Wants & Intentions.<<<<<OOOOOOOOOOOOOOOOOOOOOO~~~~~~Clients Presence~~~~~~~OOOOOOOOOOOOOOOOOOOOOPersistent Floating Needle with Cause Indicators, with nothing in present time impeding the clients attainments of wants and intentions. By erasing these charged areas........v........v.....v............v............v.....case..ptp..w/h.....upset...spouse..>>charge>>>charge<<charge<<<>>mass>><<mass>><<mass<<<>>force>><<force>><<force<<<>>charge>>>charge<<charge<<<you have eliminated much of what has been causing a low mood level, areas that have slowed, stopped or prevented the being from reaching out and attaining their wants and intentions.THE USE OF INDICATORS AND THE METERBy utilizing the Green Zone Truth Phenomena and the various meter manifestations the processor has some very potent tools. But these tools require that the processor maintains the highest levels of honor, responsibility and integrity in regards the use of these tools. For the meter can become a very destructive tool in the hands of a dishonorable, low responsibility and low integrity processor.METER DEPENDENCYPossible the worse case scenario a processor can run into is the client who is so unsure of themselves that they continuously ask: “What did the meter say?”This is a sign this poor client has been processed by a processor that used the meter to invalidate the clients data or origination’s.Other clients react negatively, when the processor says: “ Lets do a review of this area?” The client immediately plunges down scale. This indicates the constant past invalidation and false indications on the meter.The meter under these circumstances is a liability, the effective processor usually uses only direct indicators to guide them in what to process.The competent, effective processor mainly uses the meter to verify the end phenomena of the process, preferring to process the client directly in front of them. Using the clients interest and change of moods to direct them on what to process.The meter can lead a processor easily astray. I know of dozens of cases that have been ruined because of high tone arms, yet had the processors just observed the client in front of them, they would have noticed the client was making great progress even though the tone arm was running high.The true test for ANY processing is: HOW IS THE CLIENT DOING IN LIFE.When the eductive communication cycle is operable in the session the client WILL make gains.Using the meter in such a way as to destroy a clients eductive communication cycle can have serious long term consequences.Poorly trained processors who do not know their scales or the basics of processing have the greatest chance of using the meter as a destructive control device.One of the most important aspects of processing is to recover the clients ability to be certain of their ability to observe what is. That requires the correct use of the meter and observation of indicators.THE PROCESSES OF LIFEEvery process has a complete cycle of action.EVERY PROCESS HAS A COMPLETE CYCLE OF ACTION.And just in case you missed this:EVERY PROCESS HAS A COMPLETE CYCLE OF ACTION.All processes span the spectrum of ALL scales.It is immaterial what the process is, it will span the spectrum of the scales.The spectrum ranges from the bottom of the Red Zone - ABSENCE to the top of the Green Zone - MASTERY.At ABSENCE the area is being denied, not-ised or no contact.At MASTERY the client can mock up the end phenomena of the process or unmock it at will. This is done at a level of Spirit of Play.Someone who is failing at life is someone who has not taken their life processes to MASTERY. They are dramatizing incomplete processes.To truly effectively process someone you must find what their prime processes of life are and help them attain mastery on them. As they continue towards achieving their goals then all the other sub-goals, skills, abilities, virtues and codes come into play.ALL of a beings or groups Goals, Dreams, Purposes, or Wants ARE beginning PROCESSES and PROCEDURES. Upsets, problems, withholds, harmful acts, skills, abilities, knowledge, literacy, etc. are by-products connected to the journey of attaining those Goals, Dreams, Purposes and Wants PROCESSES and PROCEDURES.Achievement of the beings or groups Goals, Dreams, Purposes, or WantsARE the end product of those PROCESSES and PROCEDURES. When processing impedes the attainment of a beings or groups Goals, Dreams, Purposes or Wants PROCESSES and PROCEDURES then you are in an area of major by-passed charge and this must be cleared.An OT is being who can knowingly mock up or unmock the beings or groups Goals, Dreams, Purposes, or Wants PROCESSES and PROCEDURES sequences and produce the end phenomena’s at will.Alan
http://www.ascensionism.org/archive/acw-lightlink-posts/acw47.memohttp://www.lightlink.com/archive/acw/acw47.memo